Pengendalian Persediaan Bahan Baku Dengan Metode Material Requirement Planning Pada Produksi Majalah SM PT ABC

Authors

  • Alvita Alifdiyani Alvita Universitas Teknologi Yogyakarta
  • Widya Setiafindari Widya Universitas Teknologi Yogyakarta

DOI:

https://doi.org/10.59024/jisi.v2i3.726

Keywords:

Lot Sizing, Magazine, Material Requirement Planning, Inventory

Abstract

PT ABC operates in the printing and publishing sector which produces magazines using a make to order system. The problem that often occurs is related to the fluctuating demand for SM magazines from March 2021 to February 2024. As a result of this condition, the company cannot estimate the amount of raw materials needed, so orders are made based on estimates only. This causes overstock, especially 1001 reams of 58 gram HVS paper. The research objective is to find out planning, inventory control, and ordering techniques that produce minimal costs. In this case, suitable methods to apply are Material Requirement Planning (MRP), lot size Economic Order Quantity (EOQ), Lot For Lot (LFL) and Period Order Quantity (POQ). From the proposed improvements, the minimum cost with Lot For Lot (LFL) was IDR 2.320.000. So, costs can be minimized to IDR 93.260.746 or 98% compared to the method used by the company.

References

Adilla T, C., & Lukmandono. (2021). Perencanaan Persediaan Bahan Baku Menggunakan Metode Material Requirement Planning di PT. XYZ. Jurnal Seminar Nasional Teknologi Industri Berkelanjutan I (SENASTITAN I), 386–393.

Apriliza, P., Supian, S., & Nahar, J. (2023). The Planning For Upper Shoes Raw Material Inventory Using The Material Requirement Planning (MRP) Method (Case Study : PT X). International Journal of Global Operations Research, 4(4), 271–278. https://doi.org/10.47194/ijgor.v4i4.235

Assifa, A. H., & Pujiyanto, E. (2022). Perencanaan Pengendalian Kebutuhan Bahan Baku Menggunakan Metode MRP di PT XYZ. Seminar Dan Konferensi Nasional IDEC, 1–6.

Badriyah, L., Rafika, C. A., Prasetyo, S. D., & Dwicahyani, A. R. (2022). Optimalisasi Persediaan Bahan Bakar Minyak Pada PT. INKA Menggunakan Metode EOQ (Economic Order Quantity). Seminar Nasional Teknologi Industri Berkelanjutan II (SENASTITAN II), 117–126. http://ejurnal.itats.ac.id/senastitan/article/view/2603

Fauzani, S. P., & Rahmi, D. (2023). Penerapan Metode ARIMA Dalam Peramalan Harga Produksi Karet di Provinsi Riau. Jurnal Teknologi Dan Manajemen Industri Terapan, 2(4), 269–277. https://doi.org/10.55826/tmit.v2i4.283

Lestari, S. S., Widodo, A. P., Soebijono, T., & Setyawan, H. B. (2022). Analisis Metode Penentuan Rencana Kebutuhan Bahan Baku Yang Efektif Dan Efisien Studi Kasus PT Rafansa Prima Usaha. Jurnal Riset Mahasiswa Akuntansi, 10(2), 189–204. https://doi.org/10.21067/jrma.v10i2.7149

Mawadati, A., Anshori, M. M., & Parwati, C. I. (2023). Perencanaan Persediaan Bahan Baku Untuk Meminimalkan Total Biaya Dengan Material Requirement Planning Pada Industri Kecil Menengah. Jurnal Nasional, 334–339.

Purnama, D. H. D., & Pulansari, F. (2020). Perencanaan dan Pengendalian Bahan Baku Produksi Kerupuk Dengan Metode MRP Untuk Meminimumkan Biaya Persediaan Bahan Baku Di UD. XYZ. Juminten : Jurnal Manajemen Indutri Dan Teknologi, 01(04), 49–57.

Ridanni, S. B., & Khiroh, S. M. (2023). Pengendalian Persediaan Bahan Baku dengan Pendekatan Lot Sizing dalam Mendukung Sistem Material Requirement Planning (Studi Kasus PT. Mataram Paint). Prosiding Senakama, 2, 83–91.

Saputra, J., Hasan, A., Afrinaldi, F., & Satria, W. L. (2023). Penerapan Model - Model Lot - Sizing dalam Pengendalian Persediaan Bahan Baku pada Amra Furniture Dumai. Seminar Nasional Teknik Industri, 509–516.

Suflani, Khaeruman, & Moh Jawahir, M. (2023). Inventory Management Analysis Using The Material Requirement Planning (MRP) Method In The Optimization Of Handicraft Raw Materials. International Journal of Multidisciplinary Research and Literature, 2(3), 241–360.

Syam, A. (2020). Perencanaan Kebutuhan Bahan Baku Di Pabrik Batu Bata PT. Agung Prima Lestari Perbaungan Dengan Metode MRP. Semnastek, 174–178.

Wibowo, A. B., & Rukmayadi, D. (2020). Pengendalian Persedian Bahan Baku dengan Metode Material Requirement Planning (MRP) Untuk Produk Kue Di Perusahaan “Q.” Prosiding SNITT Poltekba, 446–454.

Zahra, Z. S., & Fahma, F. (2020). Implementasi Metode MRP Untuk Pengendalian Bahan Baku Produk ABC Pada PT XYZ. Seminar Dan Konferensi Nasional IDEC, B07.1-B07.11.

Downloads

Published

2024-05-24

Issue

Section

Articles