Eliminasi Waste pada Produk Pipa Baja Non-American Petroleum Institute (Api) di PT. XYZ dengan Pendekatan Lean Manufacturing

Authors

  • Deny Rahma Afifi Universitas 14 Agustus 1945 Surabaya
  • Wiwin Widiasih Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.59024/jisi.v4i3.1827

Keywords:

FMEA, Lean Manufacturing, VALSAT, Value Stream Mapping, Waste

Abstract

  1. XYZ is a manufacturing company engaged in steel pipe production. In the production process of non-American Petroleum Institute (API) steel pipes, the company still experiences various types of waste, resulting in an inefficient production process. The identified wastes include defects, waiting, transportation, and non-value-added activities, which contribute to increased production time and reduced productivity. This study aims to analyze the major wastes occurring in the non-API steel pipe production process and propose improvements using the Lean Manufacturing approach. The methods employed in this study include Value Stream Mapping (VSM), Value Stream Analysis Tools (VALSAT), Process Activity Mapping (PAM), and Failure Mode and Effect Analysis (FMEA). Data were collected through direct observation, interviews, and documentation of the production process. The results indicate that the dominant wastes affecting the production process are defects, waiting, and transportation. PAM analysis shows that non-value-added activities remain relatively high, leading to production time inefficiencies. Based on the FMEA results, the main causes of waste are machine conditions, work methods, and operator skills. Proposed improvements include periodic machine maintenance, production quality control, work method improvement, and the optimization of material flow.

References

Anggraini, D., & Bisma, R. (2021). Perencanaan tata kelola keamanan informasi dalam penerapan cloud computing menggunakan ISO 27001:2013 pada PT. SPINDO, Tbk. Journal of Informatics and Computer Science (JINACS), 3(1), 46–54. https://doi.org/10.26740/jinacs.v3n01.p46-54

Budi Puspitasari, N., Padma Arianie, G., & Adi Wicaksono, P. (2017). Analisis identifikasi masalah dengan menggunakan metode failure mode and effect analysis (FMEA) dan risk priority number (RPN) pada sub assembly line (Studi kasus: PT Toyota Motor Manufacturing Indonesia). J@TI Undip: Jurnal Teknik Industri, 12(2), 77–84. https://doi.org/10.14710/jati.12.2.77-84

Faudjie, W. A., & Sagaf, M. (2025). Studi kasus penerapan continuous review sistem (Q) dalam manajemen persediaan untuk optimalisasi biaya produksi di UD. Indokarya Brass. Manufaktur: Publikasi Sub Rumpun Ilmu Keteknikan Industri, 3(3), 37–54. https://doi.org/10.61132/manufaktur.v3i3.1033

Heizer, J. H., Render, B., & Munson, C. (2020). Operations management: Sustainability and supply chain management (13th global ed.). Pearson.

Hermawan, A. G., & Desmira, D. (2025). Analisis kinerja vMix Pro dalam meningkatkan efisiensi produksi dan kualitas tayangan di RRI Banten. Mars: Jurnal Teknik Mesin, Industri, Elektro dan Ilmu Komputer, 3(5), 220–227. https://doi.org/10.61132/mars.v3i5.1151

Keke, Y., V., Putrianto, V., Basyar Azzuhri, M., Pratiwi Perwitasari, E., & Y. (2023). An analysis of quality control on defect ive products at PT. Signore. KnE Social Sciences. https://doi.org/10.18502/kss.v8i9.13396

Komariah, I. (2022). Penerapan lean manufacturing untuk mengidentifikasi pemborosan (Waste ) pada produksi wajan menggunakan value stream mapping (VSM) pada Perusahaan Primajaya Alumunium Industri di Ciamis. Jurnal Media Teknologi, 8(2), 109–118. https://doi.org/10.25157/jmt.v8i2.2668

Muhammad Tengku Sadewa, M., & Sutabri, T. (2024). Perancangan sistem informasi pendataan inventory aset pada Depot Kayu Kusen Laris III. Switch: Jurnal Sains dan Teknologi Informasi, 3(1), 11–17. https://doi.org/10.62951/switch.v3i1.313

Rangga, N. D., Trio, U. A., Gunawan, A. R. S., & Budiharjo, B. (2025). Penerapan time and motion study dalam upaya perbaikan waktu pada proses produksi CV. JM Putra. Konstruksi: Publikasi Ilmu Teknik, Perencanaan Tata Ruang dan Teknik Sipil, 3(4), 199–209. https://doi.org/10.61132/konstruksi.v3i4.1147

Ristyowati, T., Muhsin, A., & Nurani, P. P. (2017). Minimasi Waste pada aktivitas proses produksi dengan konsep lean manufacturing (Studi kasus di PT. Sport Glove Indonesia). OPSI, 10(1), 85–96. https://doi.org/10.31315/opsi.v10i1.2191

Sihombing, G. (2023). Analisis penentuan target objektif pemeliharaan mesin berdasarkan kriteria downtime. IMTechno: Journal of Industrial Management and Technology, 4(2), 78–83. https://doi.org/10.31294/imtechno.v4i2.1950

Wardana, A. P., & Widiasih, W. (2023). Penerapan DMAIC dan FMEA untuk pengendalian kualitas produk kemasan kertas perusahaan percetakan PT. XYZ. Jurnal SENOPATI: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 5(1), 47–55. https://doi.org/10.31284/j.senopati.2023.v5i1.4562

Wibisono, D. (2021). Analisis overall equipment effectiveness (OEE) dalam meminimalisasi six big losses pada mesin bubut (Studi kasus di Pabrik Parts PT XYZ). Jurnal Optimasi Teknik Industri (JOTI), 3(1). https://doi.org/10.30998/joti.v3i1.6130

Wicaksono, A., & Yuamita, F. (2022). Pengendalian kualitas produksi sarden menggunakan metode failure mode and effect analysis (FMEA) dan fault tree analysis (FTA) untuk meminimalkan cacat kaleng di PT XYZ. Jurnal Teknologi dan Manajemen Industri Terapan, 1(3). https://doi.org/10.55826/tmit.v1iIII.44

Zulfikar, M., Maryadi, M., Arifiansah, A., & Fahrudin, T. (2025). Analisa perbandingan hasil pengelasan GTAW dan SMAW pada pipa A36 dengan metode uji radiografi. Venus: Jurnal Publikasi Rumpun Ilmu Teknik, 3(4), 208–218. https://doi.org/10.61132/venus.v3i4.1062

Downloads

Published

2026-06-22

Issue

Vol. 4 No. 3 (2026): Juli : Jurnal Ilmiah Teknik Industri dan Inovasi

Section

Articles

License

Copyright (c) 2026 JURNAL ILMIAH TEKNIK INDUSTRI DAN INOVASI

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.